Maytag Atlantis Washer Manual Remove Agitator Kenmore
The Maytag Atlantis washing machine is a top-loading clothes washer. The Atlantis has an agitator that is located in the centre of the wash tub. The agitator is used to move the clothes during the wash cycle, ensuring that all of the clothes are evenly laundered. The Maytag Atlantis' agitator is constructed of heavy plastic, and may break, crack or warp over time. If the agitator is damaged, it can be quickly removed so that a new agitator may be installed.
Skill level:Moderately Easy Things you need Socket wrenchSocket wrench extension Instructions 1 Unplug the washing machine. 2 Open the lid to the washing machine, then remove the cap or fabric softener cup on the top of the agitator. Both the cap and fabric softener cup will simply lift up and off of the agitator. 3 Locate, then remove, the agitator bolt, located in the centre of the bottom of the agitator. Use a socket wrench with extension to remove the bolt. The extension is necessary because you cannot reach the agitator bolt with the socket wrench alone. 4 Lift the agitator straight out of the Maytag Atlantis washing machine.
Trust Maytag® kitchen appliances, washers & dryers & more. EXPLORE THE LARGEST CAPACITY AGITATOR WASHER *. Download Crash Bandicoot 3 Warped For Android. MANUALS & DOWNLOADS. Inner City Big Fun Acapella Download Free. Maytag Atlantis Washer Manual Remove Agitator From Maytag. Kenmore Elite clothes washer. Maytag Atlantis Washer Manual Remove Agitator From Maytag.
The door lock secures the washer door shut during operation. Once the washer door is closed, the washer can begin operating. If the washer door is not latched shut, the door switch will prevent the washer from operating. If the door lock is defective, the washer will not spin or start. The door lock can fail either mechanically or electrically. Inspect the door lock for damage.
If the door lock is damaged or does not latch properly, replace it. To determine if the door lock has failed electrically, consult your washer’s wiring diagram and use a multimeter to test each of the door lock switches for continuity. If one of the switches does not have continuity, replace the switch.