Home» » Dvbworld Software And Drivers

Dvbworld Software And Drivers

0Home
Dvbworld Software And Drivers Average ratng: 4,7/5 8907votes

So i finally got my dishes tweaked and i have started with signal distribution. Up until now i havent had much luck tuning anything with my dvbworld pcie2006. It blindscans fine but any attempt to tune fails. I get the bouncing meters. I decided to look into this a bit further tonight and im sure the problem lies in the dvbworld software (not necessarily the driver but the app). Using any versions pre blindscan release and the tuner functions fine.

Dvbworld Software And Drivers

To lock a signal using any post blinscan versions (it doesnt appear the driver has changed only the app) i have to reopen the scan dialog and hit the lock button. This will lock the signal and tune a channel. This has been reproduced on 2 pcs under both xp and vista. And before anyone asks i have molex power to the card. It also appears dcad has the same issue here () i guess im gonna have to email dvbworld and see what they have to say. Profs tune no problem as well as my genpix, tbs 6920 and azbox elite. It also does not appear to be signal related as the levels are 97 / 87 when locked.

If anyone else has noticed this behaviour please post a hell yah so im not a loner. I'm getting it to work just fine on 32 bit XP. My biggest complaint is that the only way to tell if a TP is S2 is to watch the bottom of the screen during a blindscan (and write really really fast). The resulting TP list doesn't indicate if a TP is DVB-S or S2. That's kinda a bummer if (like me) you're using a different program for primary operation. I agree that the new blindscan driver is working (PCIe 2006), because DVB Viewer uses the device flawlessly.

Just not for blindscanning, lol. But the blindscanning in the DVB World software is really fast.

I'm not sure why you're experiencing a failure to lock & scan channels after it finds the TP. But if it helps you to know this, I do have it working properly in my setup.

So it is possible. When's the last time that you did a fresh install of Windows (and all the 'to do' that comes with it)? I've learned recently (the hard way) that Clonezilla is your friend. I now have back-ups from no drivers installed at all to a full installation (and a lot of steps in-between). Comes in real handy when trying to run down these little aggrevations. To clarify the tuner blindscans fine. It also tunes channels in mytheatre (although saar needs to add diseqc support.

Over 68 users downloaded software by DVBWorld Technology. See developer information and full list of programs. DVB World Free. You can set up this free PC software on Windows XP/7 32-bit. This free software is a product of DVBWorld Technology.

And yes it was tested on 4 fresh installs so im pretty sure the bug lies in the dvbworld app. It simply will not lock a signal when i select a channel from the list. The signal / quality meters bounce red until i open the scan dialog and hit the lock tp button.

Dvbworld Software And Drivers

It will then lock and render the channel properly. Just not when selecting channels from the list. Also anony55.

To tell if the tps are s2. Select one from the drop down list and if its s2 it will be nbc qpsk or nbc 8psk. The pilot settings need to be tried manually. The other thing to note is that i did blindscan a 16apsk signal with this tuner. I just wish the software worked like it should. Sucks to have to input everything into another app or reciever to test channels when im already sitting at one of my pcs. If you read back to my posts in the dvbworld thread i also second 'scanning into tp.ini files'.

I did muck around in the file it scans the tps into and its a proprietary format. Even with a hex editor it is very unusable. I can also say that i have diseqc functioning with a 17x4 emp switch and i have played with disecq 1.2 positioners and they also worked. The one annoyance i have with diseqc 1.2 is that the positions cannot be edited and are assigned based on what the software thinks it should be not what the user would like it to be. The blindscan works very well. It'd be nice to see if they are interested in making the software better. Maybe once prof releases there vapourware ptg engine 1.7 blindscan it'll pressure dvbworld to pull up their socks.

Im awaiting an email response from dvbworld with my fingers crossed. Maybe sadoun can pressure them the same way they did with the sathawk pvr800. Maybe its time for a feature request / bug sticky. If you read back to my posts in the dvbworld thread i also second 'scanning into tp.ini files'. I did muck around in the file it scans the tps into and its a proprietary format. Even with a hex editor it is very unusable. I can also say that i have diseqc functioning with a 17x4 emp switch and i have played with disecq 1.2 positioners and they also worked.

The one annoyance i have with diseqc 1.2 is that the positions cannot be edited and are assigned based on what the software thinks it should be not what the user would like it to be. The blindscan works very well. It'd be nice to see if they are interested in making the software better. Maybe once prof releases there vapourware ptg engine 1.7 blindscan it'll pressure dvbworld to pull up their socks. Im awaiting an email response from dvbworld with my fingers crossed. Maybe sadoun can pressure them the same way they did with the sathawk pvr800.

Maybe its time for a feature request / bug sticky. I can actually tune fine crackt (green strength and quality). My issue is with the current drivers and the s2 8psk channels not displaying the video ever. A rollback of the DRIVERS ONLY fixes this so you're problem is different from mine. Since SOME people are able to watch S2 channels with the current drivers, I believe whatever they changed in the driver must have some hardware incompatibilities with my system since I've tried everything software-wise.

Good luck getting a response from dvbworld. I don't think they even check that email anymore. I can actually tune fine crackt (green strength and quality). My issue is with the current drivers and the s2 8psk channels not displaying the video ever. A rollback of the DRIVERS ONLY fixes this so you're problem is different from mine. Since SOME people are able to watch S2 channels with the current drivers, I believe whatever they changed in the driver must have some hardware incompatibilities with my system since I've tried everything software-wise.

Good luck getting a response from dvbworld. I don't think they even check that email anymore. I ran across the problem of 'it scans them but does not play them' If you blind scan them in there is an option to 'blind scan tp's than search for programs. ' When I do that it looks like it works but it just doesn't.

What I found out, If you right click on the channel and go to edit for some reason it is turning on the 22k switch ( I never asked it to) Turning on 22k switches me over to my Ku setup and gets nothing for c band. Kavyanjali Hindi Serial Wiki. So i'd just say buggy software. To get around this I blind scan first and don't search for programs and come back and search 'default tp's '.

I ran across the problem of 'it scans them but does not play them' If you blind scan them in there is an option to 'blind scan tp's than search for programs. ' When I do that it looks like it works but it just doesn't. What I found out, If you right click on the channel and go to edit for some reason it is turning on the 22k switch ( I never asked it to) Turning on 22k switches me over to my Ku setup and gets nothing for c band.

So i'd just say buggy software. To get around this I blind scan first and don't search for programs and come back and search 'default tp's '. Click to expand.That's similar to my next move. Except I'll be looping out of a Pansat 2800 that's already piggy-backed to a DSR-922. I just need to make or buy another RG6 cable. In my case, the Pansat will just choose the DiSEqC port, and the DSR-922 will select the polarity. I did some switch testing the last few days with this card, and this is what I found.

1) Using a Sadoun 1.0/2.0 DiSEqC switch, the PCIe 2006 failed 100% to move the switch from it's default port (#1). This was tested with both the DVB World software, and DVB Viewer. This same switch functions properly on both the Pansat 2800 & TT3200. 2) Using a Zinwell 4x4 multiswitch, the PCIe 2006 failed 100% to switch to the '22khz ON' pair. This was tested with both the DVB World software, and DVB Viewer. This same switch functions properly on both the Pansat 2800 & TT3200. It should be noted that I did NOT test any DiSEqC 1.1 or 1.2 (motor simulated) switches.

There is no way that I've found to test the TT3200 with the DVB World software. But the TT3200 performs all these switching functions properly with these switches & DVB Viewer. The fact that DVB Viewer also fails with switching the PCIe 2006 card, has caused me to change my belief that the driver is OK. Surely, the driver is the cause of the switching failures. Or so it would seem.

City Life 2008 Serial Code. The driver will have to be fixed before I can recommend the DVB World PCIe 2006 to anyone else. From my testing it appears that a tuning delay or the ability to repeat diseqc is needed. I'm using a emp 17x4 switch. I can access disecq port 1 and 2 no problems while scanning but when trying to tune it fails 100% of the time.

For the time being ive cabled the dvbworld input from a prof 7301 loop out. It allows me to blindscan what every polarity im tuning with the prof. I can even tune 2 different frequencies in this config (same polarity of course). Itll stay like this until we see an update. Havent heard much from dvbworld lately though.

Click to expand.So all I need is a $250 DiSEqC switch and I'll be all set for scanning. It's hard to believe that they'd release this driver without testing it on at least 2 or 3 different switches. I was all set to start a campain to see if they would send an API to Lars to see if we could get the hardware blindscanning incorporated into DVB Viewer/TransEdit. 100% (hardware) blindscan functionality in TransEdit would be awesome. But DVB World needs to get their own software/drivers functional with at least the basics first.